Sterilization Results Ultracur3D ST 45

    x45 Natural, x45 Clear, and x45 Black

    This document is intended to provide guidance for manufacturers regarding sterilization of the 3D printed materials. BASF3D Printing Solutions GmbH has performed specific sterilization tests for the materials 3D printed employing Ultracur3D ST 45. Indications on material changes that can occur during the sterilization process were studied. It remains the responsibility of the device manufacturers and/or end-users to determine the suitability of all printed parts for their respective application.

    The test specimens were provided to the external laboratory (Steris GmbH) for EtO sterilization treatment. Steam Sterilization was performed internally.

    SEND US YOUR DATA
    CALL US TO CONSULT
    VISIT US TO MEET
    Sterilization Results.2
    Sterilization_Results.
    basf-ultracur3d-st-45-resin-1kg
    Tensile Properties
    Test
    Typical Values
    Tensile Modulus
    ASTM D638
    >1.6 GPa
    Ultimate Tensile Strength
    ASTM D638
    >52 MPa
    Tensile Elongation at Break
    ASTM D638
    >12 %
    Impact Properties
    Test
    Typical Values
    Notched Izod (Machined), -30 °C
    ASTM D256
    20 J/m
    Flexural Properties
    Test
    Typical Values
    Flexural Modulus
    ASTM D790
    >2.1 GPa
    Flexural Strength
    ASTM D790
    >95 MPa
    Hardness
    Test
    Typical Values
    Shore D
    ASTM D2240
    84
    Other
    Test
    Typical Values
    Water Absorption
    ASTM D570
    6.00%
    Data Sheet