Loading...

The Olsson Block Kit

Category:

109,09£

Available on backorder

Product Information

The Olsson Block is a new hot end for your Ultimaker 2. This upgrade makes it possible to very quickly and easily change nozzles on your printer. This makes it possible to achieve much more detailed prints or considerably faster extrusion rates depending on the nozzle you choose. The upgrade can be especially suitable if you want to experiment with materials that cause more wear than normal on the nozzle, such as XT-CF20.

Other Products

bcn3d_pla_blue_2.85mm__750g
BCN3D Tough PLA Blue...
45,59£
Tough PLA (Polylactic Acid) is engineered for its high impact...
bcn3d_pla_red_2.85mm__750g
BCN3D Tough PLA Red...
45,59£
Tough PLA (Polylactic Acid) is engineered for its high impact...
BCN3D TPU Black |...
45,59£
TPU (Thermoplastic polyurethane) is an elastomeric copolymer, made up of...
Loading...

The Olsson Block is a new hot end for your Ultimaker 2. This upgrade makes it possible to very quickly and easily change nozzles on your printer. This makes it possible to achieve much more detailed prints or considerably faster extrusion rates depending on the nozzle you choose. The upgrade can be especially suitable if you want to experiment with materials that cause more wear than normal on the nozzle, such as XT-CF20.

The standard kit comes with a 0.4mm nozzle which matches the size that the Ultimaker 2 ships with. In addition, it includes nozzles in the following sizes: 0.25mm, 0.60mm and 0.80mm. These can also be bought separately.

The standards kit comes complete with all the pieces you need except for an Allen Key which was supplied with your Ultimaker 2.

Much more information can be found in the following thread that was started by the creator Anders Olsson.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.