LUVOCOM 3F Filament PAHT 9825 NT is an unreinforced polyamide based formulation with the ability to be printable on non-heated chamber machines. It has excellent tensile and impact strength and allows continues use up to 100°C while retaining 50% of its mechanical properties. Its water uptake takes about 4 times longer to reach the saturation point compared to unmodified PA6, also its saturation point is 5 times lower than conventional PA6 materials.
Unless indicated otherwise, the material is delivered as ø 1.75mm and ø 2.85mm filaments in re-sealable aluminum bags. Preferably storage should be under dry, normal temperature and pressure conditions.
Physical properties | Test method | Specimen | Units | Typical value | Specific gravity | ISO 1183-3 | g/cm³ | 1.20 |
---|---|---|---|---|---|
Water absorption | 23°C / 24h | ISO 62 | MPTS ISO3167 A | % | <0.3 |
Melt flow rates (MFR) | 250°C / 2.16kg | ISO 1133 | Pellet | g/10min | 3.6 |
Melt volume rate (MVR) | 250°C / 2.16kg | ISO 1133 | Pellet | cm³/10min | 3.5 |
Thermal properties | Test method | Specimen | Units | Typical value | Heat distortion temperature | HDTA – 1.8 MPa | ISO 75
| Printed specimen | °C | 80 |
---|---|---|---|---|---|
Continuous service temperature | 20,000 h | IEC 60216 | MPTS ISO3167 A | °C
| 100 |
Service temperature | during lifetime max. 200h | MPTS ISO 3167 A | °C | 120
| |
Coefficient of thermal expansion | ISO 11359 | 10x8x4mm
| 10ˉ⁵/K | 0.5 | |
Thermal conductivity in plane | hot disk | ISO 22007 | 60x60x3mm | W/mK | 0.3 |
Electrical properties | Test method | Specimen | Units | Typical value | Insulation resistance strip electrode | R25 | DINIEC 60167 | MPTS ISO3167 A | Ω | >10¹² |
---|---|---|---|---|---|
Surface resistance | ROB | DIN IEC 60093 | Ronde 60x4mm | Ω | >10¹² |
Melt flow rates (MFR) | 250°C / 2.16kg | ISO 1133 | Pellet | g/10min | 3.6 |
Melt volume rate (MVR) | 250°C / 2.16kg | ISO 1133 | Pellet | cm³/10min | 3.5 |
Transform your 3D printing workflow with automatic material handling, efficient air filtering, and filament humidity control. The Ultimaker S5 Pro Bundle unlocks demanding applications with an extended range of materials, for always-on productivity.
Discover the easy-to-use desktop 3D printer with a large build volume that delivers accurate, industrial-grade parts, time and again. With simple setup, high uptime, and reliable dual extrusion, Ultimaker S5 is the complete professional 3D printing solution.
The new Ultimaker S3 delivers high-quality, composite-ready performance – all efficiently from your desktop. Packed with our latest technology, it is as easy to use as it is powerful, offering the most cost-effective way to adopt in-house 3D printing.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
PLG Global : Suite 2, Building 1, Isaac Newton Centre, Nottingham Science Park, NG7 2RH Nottingham, UK