About Resin Flexible
Zortrax Resin FLEXIBLE is an elastic, epoxy-based resin which is highly impact resistant. Offers smooth surfaces, high level of detail, and sharp edges. Its shore hardness stands at 60 D and its elongation and break amounts to 19%. Low shrinkage and short curing times make Zortrax Resin FLEXIBLE easy to 3D print with as the models come out just right on default settings.
This resin is perfect for precise, flexible parts, and models with softer surfaces. As all Zortrax resins, it has not been classified as carcinogenic under EU legislation and IARC criteria, so it is safe to print with when used in accordance with our safety instructions. Zortrax Resin FLEXIBLE can be cured by UV light with 405 nm wavelength.
500 ml ± 5%
Elongation at break
DIN EN ISO 527-1
ca. 2% +/- 1%
ca. 2% +/- 1%
A power tool handle:A flexible, translucent power tool handle 3D printed on Zortrax Inkspire with Zortrax Resin FLEXIBLE.
- Flexible parts
- Soft surfaces
- Impact-resistant models
- Protective cases
Zortrax Resin FLEXIBLE’s elongation at break is 19% which makes it perfect for elastic parts and models with relatively soft surfaces.
Zortrax Resin FLEXIBLE has not been classified as carcinogenic under EU legislation and IARC criteria, so it is safe to print with when used in accordance with our safety instructions.
Elasticity makes Zortrax Resin FLEXIBLE particularly resistant to impacts as models can bend and bounce back instead of breaking.